GROADA AC600V-25kW RCD Load Bank – Präzisionslösung zur Prüfung von Wechselstromleistung

Produktübersicht

DieGROADA AC600V-25kW RCD Lastbankist ein professionelles Testgerät, das zur Simulation von elektrischen Belastungen in der realen Welt fürGeneratoren, UPS-Systeme, Stromwechselrichter und andere elektrische GeräteDurch die genaue Replikation von resistiven, induktiven und kapazitiven Belastungen können Ingenieure die Leistung, Stabilität und Sicherheit des Systems unter verschiedenen Betriebsbedingungen überprüfen.

Hauptmerkmale:

• HochspannungskompatibilitätUnterstützt bis zu AC 600V für Mittel- und Hochspannungsprüfungen.

• 25kW verstellbare LastFlexible Lastschritte zur Simulation mehrerer Szenarien.

• RCD Sicherheitsschutz – Die eingebaute Reststromgeräte gewährleistet die Sicherheit von Bedienern und Geräten.

• Modulare & SkalierbarLeicht erweiterbar für Anwendungen mit höherer Kapazität.

• Benutzerfreundliche Steuerung – Digitale Schnittstelle mit lokalen und Fernüberwachungsoptionen.

Technische Spezifikationen

Industry Insights & Market Trends

Load banks have become an essential tool in power reliability testing, especially for data centers, power plants, and mission-critical facilities.

• Dieglobal load bank marketwurde geschätzt beiUSD 288.17 million in 2024 and is projected to grow at a CAGR of 3.7% through 2032.

• Another report estimates the market will reach USD 303.2 million by 2025 and USD 412.9 million by 2032 (CAGR ~4.5%).

• North America accounted for over USD 106 million in 2024, maintaining steady growth.

• Emerging trends include modular design, automated testing, hybrid load simulation (resistive + inductive), and remote monitoring solutions.

With years of expertise, GROADA integrates these cutting-edge technologies into our products, ensuring reliable, efficient, and safe load testing solutions for global customers.

Typical Applications

• Generator set performance testing and commissioning

• UPS and battery system capacity verification

• Inverter and VFD (Variable Frequency Drive) load response testing

• Power equipment troubleshooting and preventive maintenance

• Data center and critical power system validation

Case Studies

• Power Plant Commissioning – A major utility company used the AC600V-25kW load bank to validate standby generator systems under 90% load, ensuring stable power delivery.

• Data Center Validation – A Tier-III data center successfully simulated peak load conditions to test UPS redundancy and battery response.

• Industrial Project – During factory acceptance testing, our load bank enabled engineers to simulate real operating conditions, reducing post-installation faults.

Operation & Safety Guidelines

Operation Steps:

1. Verify system voltage compatibility.

2. Connect grounding and safety wiring.

3. Interface with local or remote control system.

4. Gradually apply load steps and monitor parameters.

Safety Precautions:

• Do not exceed rated load and voltage range.

• Always ensure proper grounding.

• Only qualified personnel should operate.

• Inspect wiring, fans, and resistors regularly.

Maintenance Recommendations:

• Keep ventilation unobstructed.

• Clean dust and debris periodically.

• Perform annual calibration to maintain accuracy.

• Avoid continuous operation at full load for extended periods.

Frequently Asked Questions (FAQ)

Q1: What is an AC load bank?
A: An AC load bank simulates electrical loads to test power sources such as generators and UPS systems, ensuring they can perform reliably under real operating conditions.

Q2: Why is RCD protection important?
A: The built-in Residual Current Device (RCD) disconnects the circuit in case of leakage current, providing essential safety in high-voltage environments.

Q3: Is 25kW suitable for my application?
A: If your system requires up to 25kW testing at 600V, this model is ideal. For higher power requirements, multiple units can be connected in parallel.

Q4: What is the accuracy of this load bank?
A: It delivers precision testing with a load accuracy of ±0.5%, ensuring reliable measurement results.

Q5: Can I request a customized model?
A: Yes, GROADA offers customized high-power, modular, or multi-channel load banks tailored to specific project needs.

Certifications & Quality Assurance

• Built under ISO 9001 certified quality management system

• CE / IEC / UL compliance available (model dependent)

• Calibration and third-party test reports provided on request

• Standard 12-month warranty with extended service options

• Lifetime technical support and fast response service

Why Choose GROADA?

• Over 10 years of engineering experience in load bank manufacturing

• Trusted by customers in power generation, aerospace, data centers, and renewable energy sectors

• Proven track record with successful projects worldwide

• Dedicated R&D team providing cutting-edge testing solutions